BREEDLOVE MOUNTS

          Heavy Duty Antenna Mounts for Mobile Ham Radios   $10 Flat rate Shipping  with Satisfaction Guaranteed !

This quick disconnect antenna mount has a 1/2-20 stud in the top.
And ring terminal  connection on the bottom.
This antenna mount fits on all of my brackets.

The inner sleeve grabs the pin so it never gets marked up.
The pin is screwed into the antenna and stays with the antenna when removed.
The antenna sits flat to the top of the quick disconnect.
A long handle allen wrench is included.
A 1/2 turn or less on the locking screw takes the antenna in and out.
2 inches in diameter and 2-1/2 inches tall
2 inch delrin insulator under the mount and 1-1/2 inches on the bolt.

Hi-Q  2 inch quick disconnect with SO-239 connection

Model #210   $ 75.00

Hi-Q  2 inch quick disconnect mount with ring terminal connection

Model # 211   $.  50.00

The 3/8-24 stud is removable if your antenna already has the stud. 


Additional pins allow for multiple antennas' to be used on the one mount.


Extra pins with the 1/2-20 thread on the top

This fits the 2 inch quick disconnect, Model # 210  and # 211
 

This quick disconnect antenna mount has a 1/2-20 stud in the top.
An SO-239 cable connection on the bottom.
This antenna mount fits on all of my brackets.

The inner sleeve grabs the pin so it never gets marked up.
The pin is screwed into the antenna and stays with the antenna when removed.
The antenna sits flat to the top of the quick disconnect.
A long handle allen wrench is included.
A 1/2 turn or less on the locking screw takes the antenna in and out.
2 inches in diameter and 2-1/2 inches tall
2 inch delrin insulator under the mount and 1-1/2 inches on the bolt.

Model #012   $11.50

Model #011    $11.50