Heavy Duty Antenna Mounts for Mobile Ham Radios   $10 Flat rate Shipping  with Satisfaction Guaranteed !

Extended Front bed rail bracket.

Model #  301  $ 70.00

The bar is threaded so nuts and washers are not needed.   Just two 5/16th holes to install.  The bar is 24 inches long, 1/2 inch thick and 2 inches wide with the bolts 6 inches apart/

Any of my mounts can be used on these brackets.

The Model # 300 sits 4 inches above the bedrail

The Model # 301 below stands 7 inches above the bedrail
Adjustable to a bed rail that is up to 2-1/2 wide and down to 1-1/2 inches small
Requires one inch of room between the cab and truck bed
Made of 6061 aluminum 2 inches wide and 3/8 inch thick
Stainless steel bolts
The push plate is to keep the clamping bolts from marring up the truck.
5/8 inch hole for installing any of my antenna mounts.
1/4 inch grounding lug on the back of the upright bar.

If the bedrail is flat on the side facing the cab then this new style of front bed rail bracket can be used.

Model # 313    $ 45.00

This shows a double wall truck bed but the bracket will adjust down for a single wall shaped like this. 

Front bed rail, behind the cab, bracket

$60.00   Model #300