Fold over antenna puck mount with a 3/8-24 top thread for the antenna and ring terminal connection.
Model # 602 $ 95.00
The quick disconnect is 2 inches in diameter with ring terminal connection
For the antenna with a 3/8-24 stud or hole
2-1/2 inches tall sitting on delrin insulation
Allen wrench included
4-1/2 inch puck mount with quick disconnect ball mount . 3/8-24 top thread for the antenna.
Model # 604 $ 120.00
Model # 616 $ 15.00
6 X 6 backing plate for the 4-1/2 inch puck
2 inch quick disconnect mount on the 4-1/2 inch puck mount with ring terminal connection
Model # 221 $105.00.
Pedestal puck mount
Model # 601 $ 80.00
4-1/2 inch puck with Pedestal mount and using an SO-239 cable connector. This mounts requires 2 inches of head room to install.
Model # 224 $ 115.00
3/8-24 top thread for your HF antenna
4-1/2 inch puck mount with the Flat top ball mount. 3/8-24 top thread for the antenna.
Model # 618 $104.95
Quick Disconnect antenna puck mount. 3/8-24 top thread for the antenna.
Model # 603 $ 90.00
This will replace the normal 4-1/2 inch round backing plate that normally comes with the puck.
4-1/2 inch puck mount with CB ball mount. 3/8-24 top thread for the antenna.
Model # 617 $ 104.95
The Puck is 4-1/2 inches in diameter and 1 inch thick. 6061 aluminum .
The inside backing plate is 4-1/2 inches in diameter and 3/8 inches thick.
Four 5/16th stainless steel bolts
Solid 4-1/2 inch neoprene rubber gasket.
Delrin insulators Ring Terminal connection.
The pedestal is 1-1/2 inches in diameter with a 3/8-24 top thread.
Only needs 1 inch of room under the headliner
Heavy Duty Antenna Mounts for Mobile Ham Radios $10 Flat rate Shipping with Satisfaction Guaranteed !